Techno Press
Tp_Editing System.E (TES.E)
Login Search
You logged in as

acd
 
CONTENTS
Volume 1, Number 1, January 2016
 


Abstract
Domes are architectural and elegant structures which cover a vast area with no interrupting columns in the middle, and with suitable shapes can be also economical. Domes are built in a wide variety of forms and specialized terms are available to describe them. According to their form, domes are given special names such as network, lamella, Schwedler, ribbed, and geodesic domes. In this paper, an optimum topology design algorithm is performed using the enhanced colliding bodies optimization (ECBO) method. The network, lamella, ribbed and Schwedler domes are studied to determine the optimum number of rings, the optimum height of crown and tubular sections of these domes. The minimum volume of each dome is taken as the objective function. A simple procedure is defined to determine the dome structures configurations. This procedure includes calculating the joint coordinates and element constructions. The design constraints are implemented according to the provision of LRFD-AISC (Load and Resistance Factor Design-American Institute of Steel Constitution). The wind loading act on domes according to ASCE 7-05 (American Society of Civil Engineers). This paper will explore the efficiency of various type of domes and compare them at the first stage to investigate the performance of these domes under different kind of loading. At the second stage the wind load on optimum design of domes are investigated for Schwedler dome. Optimization process is performed via ECBO algorithm to demonstrate the effectiveness and robustness of the ECBO in creating optimal design for domes.

Key Words
enhanced colliding bodies optimization; ribbed dome; Schwedler dome; lamella dome; network dome; wind load

Address
A. Kaveh: Centre of Excellence for Fundamental Studies in Structural Engineering, Iran University of Science and Technology, Narmak, Tehran, P.O. Box 16846-13114, Iran

M. Rezaei: Road, Building and Housing Research Center, Tehran, P.O. Box 1145-1696, Iran

Abstract
The influences of chloride-free components of the cement additive: triethanolamine, triisopropanolamine, sodium hyposulfite and calcium gluconate on the 1d, 3d and 28d compressive strength of cement were investigated by response surface methodology. It found the early strength activators, triethanolamine and sodium hyposulfite could enhance the 1d strength of cement effectively but they did not contribute to the 3d strength enhancement, and further their interaction was able to decrease the 28d strength of cement. Calcium gluconate was not that effective for the strength enhancement on 3 and 28 days when it\'s simply dosed. However the interaction effect of calcium gluconate with triisopropanolamine could strongly favor the strength enhancement of cement after 3 days. Results indicated it was necessary to focus attention on the potential interactions among the chemical components. And for the concern of four chemicals studied in this paper, it was feasible to formulated a kind of chloride-free cement additive that can be effective for the early strength of cement and its the strength after 3 days.

Key Words
cement additive; chloride-free; interaction; strength of cement; response surface methodology

Address
Zi-chen Zhu and Ding-cheng Gu: Changzhou Venture Capital Group Co, Ltd., 213004 Changzhou, P.R. China

Abstract
In this paper an electromechanically coupled isogeometric finite element is utilized to analyse Lamb wave excitation with piezoceramic actuators. An effective actuator design reduces the energy needed for Lamb wave excitation, which is beneficial if a structural health monitoring system should be applied for a structure. For a better understanding of the actuator behavior the piezoeceramics are studied both free and bonded at a structure. The numerical part of the analysis is performed utilizing isogeometric finite elements. To obtain the optimal performance for the numerical analysis the effect of k-refinement of the isogeometric element with respect to the convergence is studied and discussed. The optimal numerical setup with the best convergence rate is proposed and is validated with free piezoeceramic actuators. The validated model is then utilized to study the impact of actuator shape and adhesive bondline effect to the wave amplitude. The study shows that simplified analytical equations do not predict the optimal excitation frequencies for all piezoceramic designs accurately.

Key Words
FEM; isogeometric analysis; piezoelectric; smart structures

Address
Institute of Composite Structures and Adaptive Systems, German Aerospace Center (DLR), Lilienthalplatz 7, 38108 Braunschweig, Germany

Abstract
Seismic performance of structures depends on the force flow mechanism inside the structure. Discontinuity regions, like beam-column joints, are often affected during earthquake event due to the complex and discontinuous load paths. The evaluation of shear strength and identification of failure mode of the joint region are helpful to (i) define the strength hierarchy of the beam-column sub-assemblage, (ii) quantify the influence of different parameters on the behaviour of beam-column joint and, (iii) develop suitable and adequate strengthening scheme for the joints, if required, to obtain the desired strength hierarchy. In view of this, it is very important to estimate the joint shear strength and identify the failure modes of the joint region as it is the most critical part in any beam-column sub-assemblage. One of the most effective models is softened strut and tie model which was developed by incorporating force equilibrium, strain compatibility and constitutive laws of cracked reinforced concrete. In this study, softened strut and tie model, which incorporates force equilibrium equations, compatibility conditions and material constitutive relation of the cracked concrete, are used to simulate the shear strength behaviour and to identify failure mechanisms of the beam-column joints. The observations of the present study will be helpful to arrive at the design strategy of the joints to ensure the desired failure mechanism and strength hierarchy to achieve sustainability of structural systems under seismic loading.

Key Words
beam-column joints; strength hierarchy; failure mechanism; softened strut and tie model; joint shear strength

Address
Saptarshi Sasmal, Vishnu Pradeesh L., A. Kanchana Devi
and K. Ramanjaneyulu: Academy of Scientific and Innovative Research, Chennai, India

Saptarshi Sasmal, A. Kanchana Devi
and K. Ramanjaneyulu: Scientist, CSIR-Structural Engineering Research Centre, Chennai-600113, India

Abstract
In this study, the three different meta-heuristics namely the Grey Wolf Optimizer (GWO), Stochastic Fractal Search (SFS), and Adaptive Differential Evolution with Optional External Archive (JADE) algorithms are examined. This study considers optimization of the planer frame to minimize its weight subjected to the strength and displacement constraints as per the American Institute of Steel and Construction - Load and Resistance Factor Design (AISC-LRFD). The GWO algorithm is associated with grey wolves

Key Words
grey wolf optimizer; stochastic fractal search; steel frame optimization; JADE; AISC-LRF

Address
Ghanshyam G. Tejani, Vishwesh H. Bhensdadia: RK University, India

Sujin Bureerat: Sustainable Infrastructure Research and Development Center, Department of Mechanical Engineering, Faculty of Engineering, Khon Kaen University, Thailand

Abstract
This paper adopts and investigates the non-dominated sorting approach for extending the singleobjective Cuckoo Search (CS) into a multi-objective framework. The proposed approach uses an archive composed of primary and secondary population to select and keep the non-dominated solutions at each generation instead of pairwise analogy used in the original Multi-objective Cuckoo Search (MOCS). Our simulations show that such a low computational complexity approach can enrich CS to incorporate multiobjective needs instead of considering multiple eggs for cuckoos used in the original MOCS. The proposed MOCS is tested on a set of multi-objective optimization problems and two well-studied engineering design optimization problems. Compared to MOCS and some other available multi-objective algorithms such as NSGA-II, our approach is found to be competitive while benefiting simplicity. Moreover, the proposed approach is simpler and is capable of finding a wide spread of solutions with good coverage and convergence to true Pareto optimal fronts.

Key Words
multi-objective optimization; engineering design; cuckoo search; metaheuristic

Address
A. Kaveh and T. Bakhshpoori: Centre of Excellence for Fundamental Studies in Structural Engineering, Iran University of Science and Technology, Narmak, Tehran-16, Iran

Abstract
The objective of this work is to study the restraining effect in fire resistance of framed structures and to evaluate the global response of reinforced concrete frames when exposed to fire based on advanced finite element method. To study the response a single portal frame is analyzed. The effect of floor slab on this frame is studied by modeling a beam-column-slab assembly. The evolution of temperature distribution, internal stresses and deformations of the frame subjected to ISO 834 standard fire curve for both the frames are studied. The thermal and structural responses are evaluated and a comparison of results of individual members and entire structure is done. From the study it can be seen that restraining forces has significant influence on both stresses and deflection and overall response of the structure when compared to individual structural member. Among the various structural elements, columns are the critical members in fire and failure of column causes the failure of entire structure. The fire rating of various structural elements of the frame is determined by various failure criteria and is compared with IS456 2000 tabulated fire rating.

Key Words
reinforced concrete; fire safety; fire resistance; thermal analysis; thermo-structural analysis

Address
Aneesha Balaji, Muhamed Luquman K., Praveen Nagarajan and T.M. Madhavan Pillai: Department of Civil Engineering, National Institute of Technology, Calicut, India


Techno-Press: Publishers of international journals and conference proceedings.       Copyright © 2024 Techno-Press ALL RIGHTS RESERVED.
P.O. Box 33, Yuseong, Daejeon 34186 Korea, Email: admin@techno-press.com